How to Make Crepe Paper Petals for Costumes

Cutting Strips of Petals from Crepe Paper

Slip the paper from the packet, mark and cut off the required width. Unfold the strip, stretch slightly, then starting with the two ends together refold until there are eight thick­nesses. Make straight cuts down the required distance apart and round off the sections as necessary. Be sure to leave a piece of paper at the top at least 2 or 3 inches uncut (illustration No.2).

Creating Twisted Petals from Crepe Paper

Cut strips of petals as described above, then holding a petal division between the thumbs and forefingers of both hands, twist towards you with one hand and away with the other. Repeat until the whole strip is twisted (illustration No.3).

Making Rose Petals from Crepe Paper

Roll the top edges of the petal over a knitting needle of suitable size, and if a crushed effect is wanted, push the paper close together as it is rolled around the needle. When very large petals are being made use a pencil in­stead of a knitting needle (illustration No.4).

Making Cup Shaped Petals from Crepe Paper

Take several thicknesses of petals together or a single petal and with the thumbs in the center of the petal and the forefingers on the opposite side near the edges push the petal into shape.

Related Posts Plugin for WordPress, Blogger...
3 replies

Trackbacks & Pingbacks

  1. […] of this costume differs a bit from a regular slip-over. It is a straight band and the rose petals are sewed in place along one edge. Shoulder straps are sewed in place at the […]

  2. […] and curl five large rose petals (see How to Make Crepe Paper Petals), using a double thickness of crepe paper. The same color or two different tints may be used. […]

  3. […] When making them cut every other one quite a little deeper. Twist the petals as shown in the How to Make Petals for Costumes […]

Leave a Reply

Want to join the discussion?
Feel free to contribute!

I'd enjoy hearing what you think of this...leave a comment below :)